Printer manufacturers

Shenzhen yabao valley technology co. LTD.(打印机英文站)

Shenzhen yabao valley technology co. LTD.(打印机英文站)

Printer manufacturers

Hotline:13823369693
Contact information
National service hotline:13823369693

Contact: Cheng Peng

Contact number:0755-28800001

Service hotline: 0755-28800001

Address: room 602, 6 / F, block B, tengjun Industrial Park, 73 District, Baoan District, Shenzhen.

How to use the rescue print head to clean the film

Source:   Release time:2019-05-14   Click on the quantity:183

1) Disconnect the printer from the power source.

2) Open the print head and remove the print media and print ribbon from the print unit.

3) Clean the print head according to the recommended print head maintenance procedures.

4) Place the salvaged printhead film on the print channel under the printhead with the smooth side facing down and the printhead facing up.

5) Close and lock the print head.

6) Slowly pull the film completely out of the printing unit.

7) Clean the print head again according to the recommended print head maintenance procedures.

8) Load the print media and ribbon, close and lock the print head.

9) Print multiple labels to check if print quality improves. If print quality does not improve, contact technical support.

Use film to remove dirt and dirt just one time.

Each film can be used up to ten times.

When there are obvious residues or dirt on the film, the glue should be discarded and discarded.


Hot labels:How to use the rescue print head to clean the film

Shenzhen yabao valley technology co. LTD.(打印机英文站)

Contact Person: Sherry Yuan
Mobile Phone: +86 13410182885
Direct Hotline: 0755-28800001
Faxt: 0755-27873025
Email: sales@abarcn.com
Address: 6 Floor, B Block, Teng Jun Industrial Zone, BaoAn 73 District, Shenzhen City, Guangdong, China

Sweeping attention

Sweeping attention

Copyrights©2017 Shenzhen yabao valley technology co. LTD.(打印机英文站) All Rights Reserved